Make way for creativity!
Unlike a traditional RGB tape, the SMARTTAPE pixel tape allows multiple colors to be displayed in a precise length and offers the ultimate in creative freedom.
Combined with a smarttape controller, you will get 300 kinds of patterns with the possibility to intervene on speed and brightness.
The new WS2813 LED is equipped with DATA BACKUP technology that allows the entire ribbon to operate even if one LED fails. This is not possible with other LED ribbons.
|Number of LEDs/m||
|Efficacité totale (lm/W)||
|Luminous flux (lm/m)||
|Chromaticity coordinate (x)||
|Chromaticity coordinate (y)||
|Lighting technology used||
|Non-directional or directional||
|Angle de faisceau (°)||
|Mains or non-mains||
|Connected light source (CLS)||
– Trichromatic ribbon 60 LEDs/m (300 LEDs for 5 m)
– LED WS2813
– Opening : 120°.
– Power requirement: 14 W/m (70 W for 5 m)
– Required voltage: 5 V DC
– Color variation: Requires a compatible converter
– IP20: Not resistant to water splashes
– Length: 5m roll
– Thickness: 3 mm
– Width: 10 mm
– Can be cut every 17 mm
– 4-wire input cable (Data +, Backup, Ground, +V) pre-mounted
– 4-wire output cable (Data + , Backup, Ground, +V ) pre-mounted
– Full length 3M self-adhesive tape