Dimmers and boosters – Contest Dynamic Lighting https://dyna.lighting/en/ LED tape specialist Fri, 16 Jan 2026 08:51:04 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://dyna.lighting/wp-content/uploads/2021/02/cropped-favicon-32x32.png Dimmers and boosters – Contest Dynamic Lighting https://dyna.lighting/en/ 32 32 TAPEBOOSTER-4x6A https://dyna.lighting/en/product/tapebooster-4x6a/ Tue, 09 Sep 2025 10:01:38 +0000 https://dyna.lighting/product/tapebooster-4x6a/ Compatible with the COLORTAPE and PURETAPE ranges, the TAPEBOOSTER-4x6A is a signal amplifier designed to control LED ribbons. Ideal for long installations, it compensates for the insufficient power of a single driver or dimmer. Powered by 12 V or 24 V DC, it can control up to 576 W of LED ribbons at 24 V.

L’article TAPEBOOSTER-4x6A est apparu en premier sur Contest Dynamic Lighting.

]]>
  • Electrical data
    • Input voltage: 12~24 V DC
    • Output voltage: 12~24 V DC
    • Output current: 4 x 6 A max.
    • Output power: 288 W / 12 V – 576 W / 24 V
    • Output type: DC voltage
  • Special features
    • Protections: short-circuits
  • Operating environment
    • Ambient temperature: 0 °C to +45 °C
    • IP rating: 20
  • Physical characteristics
    • Dimensions: 115 x 70 x 24 mm
    • Weight: 110 g

    • L’article TAPEBOOSTER-4x6A est apparu en premier sur Contest Dynamic Lighting.

    ]]>         TAPEDIMMER-RF1 https://dyna.lighting/en/product/tapedimmer-rf1/ Mon, 01 Jul 2024 11:58:12 +0000 https://dyna.lighting/product/tapedimmer-rf1/ 1-channel, 20 A, 12-24 V dimmer for LED ribbons, controllable manually or by 2.4 GHz RF remote control. PWM control, setting memory and short-circuit protection.

    L’article TAPEDIMMER-RF1 est apparu en premier sur Contest Dynamic Lighting.

    ]]>     The TAPEDIMMER-RF1 allows manual dimming via a button, as well as dimming via 2.4GHz remote control (REMOTECTL4x2 or PILOTCTL-4×2 models). By default, it can be controlled by any remote control in any zone.

    It is also possible to assign the TAPEDIMMER-RF1 to a specific zone on the remote control. In this case, it is necessary to synchronize the RF codes before installation.

    • Operating voltage: DC 12~24 V
    • Output: 1 channel
    • Memory: Yes
    • PWM frequency: 2 KHz (default), 500 Hz, 1K Hz, 4 KHz, 7.8 KHz and 15.6 KHz
    • Maximum power output:
      • PWM ≤ 2 KHz : 20 A ; 480 W / 24 V
      • PWM = 4/7.8 KHz : 15 A ; 360 W / 24 V
      • PWM = 15.6 KHz : 10 A ; 240 W / 24 V
    • Protection: Against short circuits
    • Operating temperature: -20 ~ 60°C
    • Static power consumption: < 1 W
    • Dimensions: 103 x 40 x 24 mm
    • Weight: 65 g

    L’article TAPEDIMMER-RF1 est apparu en premier sur Contest Dynamic Lighting.

    ]]>         TAPEBOOSTER https://dyna.lighting/en/product/tapebooster/ Tue, 27 Jul 2021 12:38:37 +0000 https://dyna.lighting/product/tapebooster/ 24 V signal amplifier for tricolor and monochrome bands

    L’article TAPEBOOSTER est apparu en premier sur Contest Dynamic Lighting.

    ]]>

    A signal amplifier.

    Compatible with the COLORTAPE and PURETAPE ranges, this signal booster allows to increase the number of ribbons connected in series. Combined with an appropriate power supply, it amplifies the received signal, allowing you to connect more ribbons to a single controller for longer lengths of pipe without discontinuity or difference in brightness.

    Brightness management

    Requires optional power supply
    24 V

    Compatible with tri-color and monochrome ribbons

    Up to 182 Watts max.
    per output (576 W total)

    Seamless installation

    L’article TAPEBOOSTER est apparu en premier sur Contest Dynamic Lighting.

    ]]>         TAPEDIMMER https://dyna.lighting/en/product/tapedimmer/ Tue, 27 Jul 2021 12:38:37 +0000 https://dyna.lighting/product/tapedimmer/ 24 V drive for monochrome tape

    L’article TAPEDIMMER est apparu en premier sur Contest Dynamic Lighting.

    ]]>

    A brightness manager.

    Manually control the brightness of your PURETAPE ribbons with this dimmer which is as easy to install as it is to use.
    Combined with a power supply adapted to your ribbons, it allows you to control up to 432W of PURETAPE 24V, in an ultra-compact format.

    Brightness management

    Requires optional power supply
    24 V

    Compatible with monochrome ribbons

    Up to 432 Watts max.

    Seamless installation

    L’article TAPEDIMMER est apparu en premier sur Contest Dynamic Lighting.

    ]]>         TAPEBOOSTER-RGBW https://dyna.lighting/en/product/tapebooster-rgbw/ Tue, 27 Jul 2021 12:38:27 +0000 https://dyna.lighting/product/tapebooster-rgbw/ 4-channel signal amplifier
    24 V DC - 3 x 3 A + 1 x 9 A max.

    L’article TAPEBOOSTER-RGBW est apparu en premier sur Contest Dynamic Lighting.

    ]]>

    A 4-channel signal amplifier
    .

    Compatible with the COLORTAPE and PURETAPE series, the TAPEBOOSTER RGBW is a signal amplifier for controlling LED ribbons. It is useful if you have long ribbon lengths for which a single driver or dimmer is not powerful enough.

    A signal amplifier

    Requires optional power supply
    24 V

    Compatible with monochrome and four-color ribbons

    Up to 72W max. per R, G and B output and2 16W max. on the W output.

    Seamless installation

    Example of installation

    L’article TAPEBOOSTER-RGBW est apparu en premier sur Contest Dynamic Lighting.

    ]]>         TAPEBOOSTER-1X10A https://dyna.lighting/en/product/tapebooster-1x10a/ Tue, 02 Mar 2021 14:37:09 +0000 https://dyna.lighting/product/tapebooster-1x10a/ 1-channel signal booster
    12-24 V DC - 10 A max.
     

    L’article TAPEBOOSTER-1X10A est apparu en premier sur Contest Dynamic Lighting.

    ]]>

    A 1-channel signal amplifier
    .

    Compatible with COLORTAPE and PURETAPE series, TAPEBOOSTER 1x10A is a control signal amplifier for monochrome LED ribbons. It is useful if you have long ribbon lengths for which a single driver or dimmer is not powerful enough.

    A signal amplifier

    Requires optional power supply
    12 V or 24 V

    Compatible with monochrome ribbons

    Up to 240 Watts max.

    Seamless installation

    Example of installation

    L’article TAPEBOOSTER-1X10A est apparu en premier sur Contest Dynamic Lighting.

    ]]>         DOORSENSOR https://dyna.lighting/en/product/doorsensor/ Tue, 27 Jul 2021 12:38:30 +0000 https://dyna.lighting/product/doorsensor/ Door opening sensor 24 V 2.5 A maximum
    Compatible with monochrome ribbons only

    L’article DOORSENSOR est apparu en premier sur Contest Dynamic Lighting.

    ]]>

    The door opening sensor.

    The DOORSENSOR is a door sensor compatible with all monochrome ribbons of the Contest Dynamic Lighting range. Powered by 24 V, it offers an On/Off function with a fade effect.

    Technical information

    Pour rubans monochromes

    Alimenté en 24 V

    Fade effect

    Compatible with monochrome ribbons

    L’article DOORSENSOR est apparu en premier sur Contest Dynamic Lighting.

    ]]>